COLIGHT 4inch Rob2 Pro Series Yellow Spot Rear Chasing Lights(Set/2pcs)


White Diffused
Yellow Diffused
White Flood
Yellow Flood
White Spot
Yellow Spot
Prix:
Prix réduit$78.00 USD Prix normal$97.00 USD

Description

No matter exploring a forest trail in heavy fog, or kicking up some heavy dust at the dunes, the yellow spot Rob2 pros are always ready to penetrate the dust & fog to provide sufficient rear illumination for you. Simultaneously it's much easier for those behind you to control the car distance so they can slow down to avoid a collision or speed up to be not left far behind.

4inch Rob2 pros yellow spot beam rear chasing lights
The Yellow Spot Rob2 Pros are designed to provide a concentrated, focused light in a narrow and straight pattern, particularly effective in adverse weather conditions such as fog, rain, or snow. This is especially useful for long-distance visibility, allowing truck drivers to see and be seen. Reach 1lux@370meters, the Rob2 Pro yellow Spot beam is especially useful at higher cruising speeds where they help to identify hazards and signs.

Colight 4 inch Rob2 Series Driving Light----Convex Lens/Spot Beam
Small But Powerful: Don't let the size fool you. Only has 2 LEDs, the Rob2 Pro can offer an incredible 3,250 lumens out of a tiny 4” x 2.5” housing. That is undoubtedly the most cost-effective LED light. And it can be mounted where traditional lights would never fit. Moreover, it only draws 25 watts per light so your electrical system will barely know it’s there. This LED is perfect for all your adventures! 

Unique Appearance: Similar but wilder. With the addition of a streamlined design based on the appearance of Rob2 and further anti-corrosion treatment on the shell, Rob2 Pro has a greater impact than its predecessor. It is more in line with the off-road spirit and can deal with the harsher environment completely freely. And we also have the protective cover for CO LIGHT Rob2 Pros light pods.

Protective Cover for COLIGHT Rob2 Pros Light Pods

Tough And Durable: With an IP68-rated weatherproof, professional-grade Connector, the durable LED work light is up to the task. A black-painted aluminum housing and PMMA lens protect internal components, and an integral heat sink allows LEDs to run cool, which leads to an incredibly long life span. The light has an adjustable stainless steel mounting bracket and operates within a wide 9V-32V DC range.

Full Set of Accessories Available: For better and safe road traffic, it is recommended to add an extra waterproof DT wire harness to control the light pods separately. When you add our DT wire harness to your cart, the whole light setup will be upgraded to waterproof.
We also offer no-drill bracket clamp holders and the custom ditch light bracket for 2010-2014 SVT Raptor2014-2021 Polaris RZR XP10002015-2017/2017-2019 Ford F-150, 2005-2015 Toyota Tacoma, 2007-2017 Jeep Wrangler JK, 2007-2016 Toyota Fj Cruiser. It's easy to install the lights on the hood with our bracket. These two drill-free bracket clamp holders make installation more convenient, avoid damaging your car, and also ensure that the ditch light stands firmly on the hood.
You asked, we delivered. We also provide the replaceable lens for more occasion use. It's very easy to DIY the needed light pods.

SPECIFICATION:
  • Operating Voltage: 10-30V
  • Current Draw(per light): 2.20A*12V
  • Brightness(per light): 3250lm
  • Waterproof rate: IP68
  • Housing Color: Black
  • Color Temperature: 3000K
  • Housing Material: Die Cast Aluminum
  • Beam pattern Options: Spot beam
  • Lens: Corrugated Lens/Concave Lens/Convex Lens
  • Lens material: Polycarbonate
  • Mounting Bracket:  Adjustable Stainless Steel Side Brackets
  • Operating temperature: -40℃ - +80℃
  • Size: 4*2.5*3.3 inch
  • Light Distance: 1lux@370m
  • Sold in pair
  • What's in the package: 2pcs Rob2 pro lights, necessary bolts, and screws
  • If you need extra wire&switch or swappable lense, or mounting brackets, please check this collection: Rob2 Light Kit 

You may also like

Recently viewed